Ceiling-fan-integrated air conditioning: Airflow and temperature characteristics of a sidewall-supply jet interacting with a ceiling fan

Ceiling-Fan-Integrated Air Conditioning (CFIAC) is a proposed system that can greatly increase buildings’ cooling efficiency. In it, terminal supply ducts and diffusers are replaced by vents/nozzles, jetting supply air toward ceiling fans that serve to mix and distribute it within the room. Because of the fans’ air movement, the system provides comfort at higher room temperatures than in conventional commercial/ institutional/retail HVAC. We have experimentally evaluated CFIAC in a test room. This paper covers the distributions of air-speed, temperature, and calculated comfort level throughout the room. Two subsequent papers report tests of human subject comfort and ventilation effectiveness in the same experimental conditions. The room’s supply air emerged from a high-sidewall vent directed toward a ceiling fan on the jet centerline; we also tested this same jet on a fan located off to the side of the jet. Primary variables are: ceiling fan flow volumes in downward and upward directions, supply air volume, and room-vs-supply temperature difference. Velocity, turbulence, and temperature distributions are presented for vertical and horizontal transects of the room. The occupied zone is then evaluated for velocity and temperature non-uniformity, and for comfort as predicted by the ASHRAE Standard 55 elevated air speed method. We show that temperatures are well-mixed and uniform across the room for all of the fan-on configurations, for fans both within or out of the supply jet centerline. The ceiling fan flow dominates the CFIAC airflow, and even though non-uniform is capable of providing comfortable conditions throughout the occupied area of the room

Lessons Learned from Field Monitoring of Two Radiant Slab Office Buildings in California

AbstractIn this paper we present the results from field studies of two low-energy office buildings in California, both using radiant slab ceiling systems (thermally activated building systems, TABS) for primary cooling and heating in the buildings. Both buildings are certified LEED Platinum and incorporate a wide range of energy efficient technologies and design strategies, including TABS, advanced shading systems, underfloor air distribution, chilled beams, ceiling fans, natural ventilation, and photovoltaic panels. Findings and analysis from the following building performance assessment techniques will be discussed.•Occupant satisfaction survey. Occupant surveys are an invaluable source of information for describing how well the building is providing a high quality indoor environment for the occupants. In addition, the survey results are also compared against a large benchmark survey database of over 50,000 occupants.•Wireless measurement system. A network of wireless sensors was installed in selected zones of the buildings to provide additional more detailed information about the operation and control of the radiant slab system. This data was combined with trend data from the building management system (BMS) to examine the performance of the buildings during both winter and summer conditions. Some control issues were identified and corrected based on these measurements.•Energy performance analysis. We collected utility data for 2014 in one of the buildings and used this information to determine the building's Energy Star rating

On the Energy Performance Design of a Skilled Nursing Facility Building

In Europe, the criteria for designing new buildings are regulated by a set of European Directives and national laws having as a goal the creation of net zero energy buildings by the year 2020. Moreover, according to 2010/31/EU Directive after 31 December 2018, new buildings occupied and owned by public authorities must be nearly zero-energy buildings. The low energy consumption must be accompanied by well-defined thermal characteristics of the building envelope (both opaque and transparent components) and HVAC systems, and must ensure acceptable internal thermal comfort conditions. An interesting case study, proposed in this work, is represented by the elderly nursing building “RelaXXI” which hosts dependent people who require 24-hour special assistance and medical care. Designers focused on the indoor environmental quality as the main goal of the project and the HVAC system has been designed pursuing the maximum integration with the building and its architecture. The aims of this paper are to (1) describe the main design characteristics of the RelaXXI building, (2) analyze the results obtained by dynamic simulation of heating and cooling energy demands, and (3) present the results of performance monitoring completed to date

Occupant Satisfaction in 60 Radiant and All-air Building

Radiant heating and cooling systems have the potential to save energy and are widely used in zero net energy buildings. Their positive and negative impacts on indoor environmental quality and, in particular, thermal comfort compared to all-air systems are still debated in the literature. This paper presents indoor environmental quality survey results from 3,892 respondents in 60 office buildings located in North America. 34 (2,247 respondents) of these buildings utilized all-air systems and 26 (1,645 respondents) utilized radiant systems as primary conditioning system. Our results indicate that radiant and all-air buildings have equal indoor environmental quality, including acoustic performance, with a tendency towards improved temperature satisfaction in radiant buildings

Optimizing Radiant Systems for Energy Efficiency and Comfort

Radiant cooling and heating systems provide an opportunity to achieve significant energy savings, peak demand reduction, load shifting, and thermal comfort improvements compared to conventional all-air systems. As a result, application of these systems has increased in recent years, particularly in zero-net-energy (ZNE) and other advanced low-energy buildings. Despite this growth, completed installations to date have demonstrated that controls and operation of radiant systems can be challenging due to a lack of familiarity within the heating, ventilation, and air-conditioning (HVAC) design and operations professions, often involving new concepts (particularly related to the slow response in high thermal mass radiant systems). To achieve the significant reductions in building energy use proposed by California Public Utilities Commission’s (CPUC’s) Energy Efficiency Strategic Plan that all new non-residential buildings be ZNE by 2030, it is critical that new technologies that will play a major role in reaching this goal be applied in an effective manner. This final report describes the results of a comprehensive multi-faceted research project that was undertaken to address these needed enhancements to radiant technology by developing the following: (1) sizing and operation tools (currently unavailable on the market) to provide reliable methods to take full advantage of the radiant systems to provide improved energy performance while maintaining comfortable conditions, (2) energy, cost, and occupant comfort data to provide real world examples of energy efficient, affordable, and comfortable buildings using radiant systems, and (3) Title-24 and ASHRAE Standards advancements to enhance the building industry’s ability to achieve significant energy efficiency goals in California with radiant systems. The research team used a combination of full-scale fundamental laboratory experiments, whole-building energy simulations and simplified tool development, and detailed field studies and control demonstrations to assemble the new information, guidance and tools necessary to help the building industry achieve significant energy efficiency goals for radiant systems in California

Effects of diffuser airflow minima on occupant comfort, air mixing, and building energy use (RP-1515)

There is great energy-saving potential in reducing variable air volume (VAV) box minimum airflow setpoints to about 10% of maximum.  Typical savings are on the order of 10-30% of total HVAC energy, remarkable for an inexpensive controls setpoint change that properly maintains outside air ventilation. However, there has long been concern whether comfort and room air mixing are maintained under low flows through diffusers, and this concern has prompted VAV minima to be typically set at 20-50% of maximum.RP 1515 evaluated occupants’ thermal comfort and air quality satisfaction in operating buildings under both conventional and reduced minimum VAV flow setpoints, and measured the air diffusion performance index and air change effectiveness for typical diffuser types in the laboratory.  The hypotheses were that lowered flow operation would not significantly reduce comfort or air quality, and that HVAC energy savings would be substantial. The hypotheses were almost entirely confirmed for both warm and cool seasons.  But beyond this, the reduction of excess airflow during low-load periods caused occupants’ cold discomfort in the warm season to be halved, a surprising improvement.  It appears that today’s widespread overcooling of buildings can be corrected without risk of discomfort by lowering conventional VAV minimum flow setpoints